 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Embedded Device Server Flexible, well-developed IP protocol stack TTL serial interface Two serial ports Accepts 5 VDC regulated input power HTTP, serial, Telnet and SNMP management Flash ROM for easy software upgrades Custom protocol support available 256-bit AES encryption for secure communications Build 10/100 Base-T Ethernet Connectivity into Your Products Quickly and Economically The Lantronix Micro100 is a board-level product for OEM users who want to embed proven mainstream Ethernet connectivity in their products quickly and economically. The Micro100 brings over a decade of device networking experience, rock-solid IP firmware, extensive Building Ethernet connectivity into a product is no simple task. It requires a significant investment in hardware and software integration - often in areas Measuring only 49 x 40 mm the Micro100 can easily outside of core competencies. So why build it fit into almost any size serial device that would yourself when there is a better alternative? benefit from network connectivity. It includes a The Micro100 embedded device server provides an integrated solution to add proven Ethernet connectivity to an existing design quickly and economically, and with a high level of flexibility. Device networking starts with a Device Server . These amazing products enable most any device with serial capability (TTL) to become a fully functional member of an Ethernet network. Device Servers include all of the elements needed to network-enable your products - a processor, real-time operating TM system (RTOS), a robust TCP/IP stack, a web server, and a network connection. All the connected product additionally needs is a header, providing connections to a power source and to a TTL serial port. applications support and advanced encryption standards to industrial and commercial environments. serial interface TTL connector and 10/100 Base-T Ethernet RJ45 jack. The Micro100 includes the same IP protocol stack found on the other Lantronix embedded products. RoHS-compliant, the Micro100 meets Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Embedded Device Server TM Micro100 Board Layout and Pinouts TOP VIEW LEDs (CON4) RJ45 (CON 2) RESET SWITCH LEDs BOTTOM VIEW SMT HEADER (CON 3) CON4 Features Micro100 Protocols ARP, UDP, TCP/IP, Telnet, ICMP, SNMP, DHCP, TFTP and HTTP Networking Interface RJ45 (10/100Base-T) Ethernet Serial Interface TTL level (Asynchronous) Data Rates 300 bps to 230 Kbps Serial Line Formats Characters: 7 or 8 data bits Stop bits: 1 or 2 Parity: odd, even, none Modem Controls DTR, RTS, CTS, DCD Flow Control XON/XOFF (Software) CTS/RTS (Hardware) Management HTTP SNMP Serial login Telnet login Security Optional 256-bit AES Password protection System Software Flash ROM standard: downloadable from a TCP/IP host (TFTP) or over serial port Diagnostic LEDs Serial Channel Status Ethernet Link Status Diagnostic Information Compatibility Ethernet: Version 2.0/IEEE 802.3 Power Requirements 5 VDC +/-5% at ~ 200 mA Memory Flash: 512K RAM: 256K - zero wait Environmental Standard Temperature 0 to 70C (32 to 158F) Storage Temperature -40 to 85C (-40 to 185F) Physical Dimensions (W x H) 49 x 40 mm (1.929 x 1.575 in) CON1 (2 x 6 Pins)TTL Pin 1 2 3 4 5 6 7 8 9 10 11 12 Function +5V GND RXA (Input) TXA (Output) RTSA (Output) DTRA (Output) CTSA (Input) DCDA (Input) R/V/A (Output) RESET RXB (Input) TXB (Output) 3 X 0.100" MOUNTING HOLES TTL (CON 1) 1.929" Drill 3 0.100" 1.575" Embedded Device Server TM CON2 (RJ45) Pin 1 2 3 4 5 6 7 8 Con1 TX+ TXRX+ NC NC RXNC NC CON3 (2 x 2 SMT in place of RJ45) Pin 1 2 3 4 Function TX+ TXRX+ RX- CON4 (2 x 4 pins in place of LEDs) Pin 1 2 3 4 5 6 7 8 Function +3.3V +3.3V DIAG (Red) CH1 (Green) +3.3V +3.3V CH2 (Yellow) Link (Green) For customers who also require the flexibility of also offering an 802.11 wireless solution, the pin-compatible WiMicroTM is available! Warranty 2-year limited warranty Ordering Information Part Number Description MO00AA002-01R Micro100, No RJ45 connector, No LEDS, with TTL pin header, RoHS MO00AA0E2-01R AES Encrypted Micro100, No RJ45 connector, No LEDS, with TTL pin header, RoHS MO11AA002-01R Micro100 with RJ45 connector, LEDS, with TTL pin header, RoHS MO11AA0E2-01R AES Encrypted Micro100 with RJ45 connector, LEDS, with TTL pin header, RoHS MO22AA002-01R Micro100, Pin header for Ethernet, Pin header for LED connection, with TTL pin header, RoHS MO22AA0E2-01R AES Encrypted Micro100, Pin header for Ethernet, Pin header for LED connection, with TTL pin header, RoHS 15353 Barranca Parkway | Irvine | CA 92618 | USA | Tel: 800.526.8764 | Fax: 949.450.7249 | www.lantronix.com (c)2006, Lantronix, Inc. Lantronix is a registered trademark and WiMicro and Device Server are trademarks of Lantronix, Inc. All other trademarks are the property of their respective owners. Specifications subject to change without notice. All rights reserved. 910-417 05/06 DGS2500 |
Price & Availability of MICRO100-KIT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |